How to set up an Atari 2600 part 1

Hello, and thankyou for purchasing the Atari 2600 video game system. We hope it will give you many hours of entertainment.

First of all, you must set the system up on your TV before you can use it. Look at the back of the system; you will see an input for the controllers, power lead, and a cable coming out the back. This is the RF lead; it carries the video and audio from the system to your TV. Plug this lead into the aerial jack on your TV. Take the power brick, and plug it into the mains. Then take the other end of the lead and plug it into the power input on the back of the unit. Make sure the unit is on a flat surface when in use. Plug your controllers into the controller ports on the back of the unit.